home *** CD-ROM | disk | FTP | other *** search
/ Shareware Overload Trio 2 / Shareware Overload Trio Volume 2 (Chestnut CD-ROM).ISO / dir34 / dos999.zip / 3701.TXT < prev    next >
Text File  |  1993-04-01  |  2KB  |  53 lines

  1. __________________________________________________________________________
  2. STACKER NOTE                                                  STACKER NOTE
  3. Title:  SDEFRAG Error #04
  4. STAC FAX Index #3701 - 1/19/93                           
  5. __________________________________________________________________________
  6.  
  7.  
  8. Background
  9.  
  10. When  you  run  SDEFRAG in Stacker 3.0, you may see an error  #04 message,  
  11. followed by an instruction to run the command CHECK  to find and correct 
  12. this error. The condition that causes error  #04 is  harmless and has no 
  13. effect on data integrity. In fact, it  is so minor that CHECK doesn't 
  14. normally even notice it.
  15.  
  16. In  the past, some users have added the /=D switch to CHECK. This 
  17. undocumented switch is intended for internal development purposes only. 
  18. It causes CHECK to report on many conditions that are  part of  Stacker's 
  19. normal operating mode. If you use the command CHECK /=D  /F,  CHECK may offer 
  20. to fix transient conditions by deleting areas  on  your disk. If you use /=D, 
  21. answer NO if it  offers  to delete anything. You should not ever have to use 
  22. /=D.
  23.  
  24. Error  #04  does  not  harm  data and no  response  from  you  is required.   
  25. In the normal course of events, Stacker corrects  the condition 
  26. automatically.
  27.  
  28. Result
  29.  
  30. Stac  has modified SDEFRAG so that it automatically corrects  the condition  
  31. that  resulted in error #04, so  you  won't  see  this message  again.  
  32. You can download the new version (dated  01/06/93) from  the Stac Forum on 
  33. CompuServe (GO STACKER) or from the  Stac BBS,  or  ask Stac Technical 
  34. Support to send it to you. Copy  the new file to the STACKER directory to 
  35. replace the old SDEFRAG.EXE. If the files in your STACKER directory are dated 
  36. 01/06/93 or later, you already have a modified version of SDEFRAG on your 
  37. disk.
  38.  
  39. When you run the modified version of SDEFRAG, you won't get error #04. Do not 
  40. use the /=D switch on the CHECK command because it is for internal 
  41. development use only.
  42.  
  43.  
  44.  
  45.  
  46.  
  47.  
  48.  
  49.  
  50.  
  51. ___________________________________________________________________________
  52. Copyright 1993, Stac Electronics
  53.